Description
PTARAX ZP-50 Digital Force Gauge – 50 N
The PTARAX ZP-50 is a compact digital force measuring instrument developed for applications where relatively small push and pull forces must be measured with fine resolution. Its 50 N capacity and 0.01 N display resolution make it suitable for inspecting small mechanical assemblies, testing spring resistance and evaluating light component actuation forces. A high-speed sampling system and multiple measurement modes support both routine checks and detailed force evaluation.
Key Features
- 50 N Measurement Capacity: Measures tension and compression forces up to 50 N.
- 0.01 N Resolution: Fine measurement increments for low-force applications.
- ±0.5% Accuracy: Manufacturer-specified measurement accuracy.
- 1000 Hz Sampling Rate: Captures force measurements at up to 1000 samples per second.
- Multiple Measurement Modes: Real-time tracking, peak hold and automatic peak measurement.
- Digital Force Analysis: Stores up to 999 results with minimum, maximum and average values.
- Pass/Fail Indication: Programmable upper and lower limits with −NG, OK and +NG indications.
- USB Connectivity: Transfers recorded measurements to a computer using the supplied cable and software.
- Portable or Stand-Mounted: Suitable for handheld use or installation on a compatible test stand.
Fine-Resolution Force Measurement
With a maximum capacity of 50 N and resolution of 0.01 N, the ZP-50 is designed for applications where smaller force variations need to be observed. It can be used to evaluate light mechanical resistance, spring forces and the operating force of small components within its specified capacity.
Peak Force Detection and Statistical Functions
Real-time tracking, peak hold and automatic peak modes allow users to monitor applied force or capture maximum values during a test. The internal memory accommodates up to 999 results, while minimum, maximum and average functions support comparison across repeated measurements.
Portable Testing and Computer Connectivity
The backlit, reversible five-digit LCD supports convenient reading in different testing orientations. USB data transfer and supplied software provide options for reviewing measurements on a computer. For more consistent test positioning, the gauge can be mounted on a compatible force test stand.
Typical Applications
- Small spring force testing
- Light push-button actuation checks
- Small mechanical component inspection
- Low-force assembly verification
- Laboratory force measurement
- Product development and quality control




