Description
934-1 Barcol Hardness Tester
The 934-1 Barcol Hardness Tester is a portable mechanical hardness testing instrument designed for rapid indentation hardness measurements on aluminium, aluminium alloys, fibre-reinforced plastics and hard plastics. Its compact, hand-operated design allows hardness measurements directly on workpieces, including large fabricated components and assembled structures, without the need for separate supporting equipment.
Key Features
- 0–100 HBa measurement range with 0.5 HBa resolution
- Suitable for aluminium, aluminium alloys, FRP and hard plastics
- One-handed operation for convenient on-site hardness inspection
- Suitable for workpieces with thickness greater than 0.8 mm
- Single-sided testing without additional workpiece support
- 100-division mechanical dial for direct hardness readings
- High-hardness, replaceable indenter
- Hardness conversion to HB, HR, HV and HW using conversion tables
- ASTM B648-00 and ASTM D2583 applications
- Lightweight 0.5 kg portable design
Hardness Measurement
The 934-1 measures Barcol indentation hardness over a range of 0–100 HBa, with a resolution of 0.5 HBa. The instrument is suitable for hardness testing from relatively soft pure aluminium to harder aluminium alloys. The specified indication error is ±2 HBa within 42–48 HBa and ±1 HBa within 81–88 HBa, with corresponding repeatability error specifications.
Portable and Single-Hand Operation
Designed for convenient field inspection, the tester can be operated with one hand and requires access to only one side of the workpiece. This makes it suitable for inspecting large aluminium sections, fabricated assemblies and installed components without dismantling or moving the workpiece. Testing can be performed on suitable workpieces with a thickness greater than 0.8 mm.
Mechanical Dial and Hardness Conversion
The instrument features a mechanical dial with 100 graduations for direct Barcol hardness readings. Measurement results can be converted to HB, HR, HV and HW using the appropriate hardness conversion tables. Converted values should be treated as approximate equivalents rather than direct measurements of those hardness scales.
Indenter and Maintenance
The 934-1 incorporates a high-hardness indenter designed for extended service life and replacement when required. The standard delivery includes two spare indenters, high- and low-hardness reference blocks and a calibration wrench to support routine instrument checking and adjustment.
Standards and Testing Applications
The 934-1 is specified for aluminium alloy indentation hardness testing under ASTM B648-00 and for fibre-reinforced plastics and hard plastics under ASTM D2583. It is suitable for quality inspection, production checks and on-site material hardness evaluation where the applicable test method and workpiece conditions permit.
Typical Applications
- Aluminium extrusion and profile inspection
- Aluminium alloy doors, windows and ladders
- Aluminium sheet, bar and fabricated component testing
- Fibre-reinforced plastic (FRP) hardness testing
- Hard plastic component inspection
- Incoming material quality control
- Manufacturing and production quality assurance
- On-site inspection of assembled aluminium structures

