Description
TIME TT120 High-Temperature Ultrasonic Thickness Gauge
The TIME TT120 is a portable ultrasonic thickness gauge designed for measuring steel thickness on elevated-temperature surfaces. With a specified surface temperature range of −10°C to +300°C and a dedicated ZW5P high-temperature transducer, it supports industrial thickness inspection where conventional temperature-range probes may be unsuitable.
Key Features
- High-temperature steel surface measurement up to 300°C
- 0.75–300.00 mm steel measurement range, depending on the transducer
- 0.1 mm display resolution
- Measurement tolerance of ±(0.5%H + 0.04) mm
- Fixed sound velocity of 5900 m/s for steel testing
- ZW5P high-temperature transducer included
- Simple two-key operation
- Four-digit LCD with backlight
- Storage of 10 measurement values
- Automatic transducer nonlinearity compensation
- Integrated 4.0 mm steel calibration plate
- Selectable mm/inch measurement units
- Approximately 250 hours of battery operation
High-Temperature Thickness Measurement
The TT120 is designed for steel thickness measurement on surfaces ranging from −10°C to +300°C. The supplied ZW5P high-temperature transducer enables ultrasonic inspection of suitable elevated-temperature steel components. Appropriate probe contact procedures and compatible couplant should be used when measuring hot surfaces.
Steel Thickness Measurement
The instrument provides a steel measurement range of 0.75–300.00 mm, depending on the transducer, with a manufacturer-specified tolerance of ±(0.5%H + 0.04) mm. Its fixed sound velocity of 5900 m/s is intended for steel thickness testing rather than general multi-material sound velocity adjustment.
Simple Operation and Display
The TT120 features a simplified two-key interface and a four-digit backlit LCD for straightforward thickness measurement. Readings can be displayed in millimetres or inches, with storage for up to 10 measurement values.
Calibration and Portable Design
An integrated 4.0 mm steel calibration plate supports routine instrument adjustment, while automatic nonlinearity compensation helps correct transducer response characteristics. The compact 126 × 68 × 23 mm instrument weighs approximately 250 g including batteries and operates using two AA batteries.
Typical Applications
- High-temperature steel thickness inspection
- Hot steel pipe and tubing measurement
- Industrial equipment maintenance
- Steel fabrication and processing
- Plant maintenance and condition inspection
- Non-destructive testing of elevated-temperature steel surfaces
- Production and maintenance quality control





